As we all know, the Samsung Galaxy S6 and S6 Edge were running a very hot and heavily modified Samsung TouchWiz software. This version of TouchWiz is called DPC Watchdog Violation and it interferes with the operation of your device.
Dealing with problems in your computer systems can be a headache. You have to deal with the problem, get it fixed, and then get the system fixed again if it breaks. But what if you can’t get any support from the company you bought the PC from, or their support is of no help, or they just don’t want to help you?
DPC watchdog violations are errors in the operating system kernel that are supposed to prevent programs from running out of their allocated memory. However, these errors are very common, and are commonly encountered by Windows users. Fortunately, there are some solutions to prevent these errors, which are explained below.
Although Windows is a well-made and reliable operating system, it is not immune to bugs and malfunctions that users may encounter from time to time. While most of these problems are accompanied with an error number and an explanation, it is at best perplexing for the average user.
This page discusses the DPC Watchdog Violation, its causes, and how to resolve the issue.
Watchdog refers to the bug checker that monitors and records your Windows applications and PC performance. DPC stands for Deferred Procedure Call.
A BSoD may be caused by a mistake in this procedure, and in severe instances, your PC may be unable to start. Hardware misconfigurations, software incompatibilities, obsolete drivers in general, and damaged system files are all possible causes of the problem.
Also see: 6 Fixes for Windows Update Stuck at 0
Here are a few solutions you may attempt to see whether the DPC Watchdog violation is resolved.
All new hardware should be removed.
To begin, switch off your computer and disconnect any new devices or peripherals you may have installed. Then, verify whether your computer starts up normally.
If you’re uninstalling several devices, do it one at a time, restarting your computer after each one to isolate the problematic hardware.
All new software should be removed.
This error may be caused by both incompatible hardware and improper software. If you’ve recently installed any new applications, try uninstalling them to see if it fixes the issue.
If you’re uninstalling several applications, do it one at a time and reboot your computer each time to isolate the problematic software.
Also see: Windows 10’s Generic PnP Monitor Problem: 5 Solutions
Start the Event Viewer.
To isolate a problem on your PC, open the event viewer and look for any errors, warnings, or alerts that may appear, suggesting the true cause of the problem.
By hitting the Windows key and looking for it in the start menu, you may start the Even Viewer. Check the System folder for any problems or warnings after the program is launched.
Drivers for your SSD should be updated.
This issue may also be caused by out-of-date SSD firmware.
Step 1: To enter the quick access menu, press Windows key + X and choose Device Manager.
Step 2: Right-click the problematic device and choose Update drivers from the context menu.
This should assist in resolving the issue.
Also see: How to resolve the error “the plain http request was delivered to the https port”
Perform an SFC scan.
The most common cause of strange behavior on your computer is corrupt files. Here’s how to get rid of them and, perhaps, fix your problem.
Step 1: Open the Cortana/Search box by pressing Windows Key + S and searching for Powershell. From the search results, choose Windows Powershell.
Step 2: Run sfc /scannow to check your system for problems.
Step 3: If the SFC scan uncovers any issues, use the command below to fix them.
DISM /Online /Cleanup-Image /RestoreHealth DISM /Online /Cleanup-Image /RestoreHealth
Restart your computer, and the problem should be gone. If that doesn’t work, you may use this instructions to perform a DISM scan to repair any additional problems.
Use the Check Disk tool to see whether your hard drive is in good shape.
The BSoD may indicate that your boot drive isn’t performing as it should. To see whether your storage disks are functioning, use the check disk tool.
You can find a comprehensive tutorial to running the check disk tool here.
Also see: How to Fix an SD Card Reader That Doesn’t Show Up in File Explorer
Run the hardware troubleshooter in Windows.
Windows 10 has a number of troubleshooters that may help you fix a variety of problems. However, Microsoft has deleted the hardware troubleshooter from the troubleshooter’s menu for some reason. As a result, here’s another method to run the hardware troubleshooter.
To enter the Run prompt, press Windows key + R. Enter cmd into the command prompt.
Step 2: Press enter after typing msdt.exe -id DeviceDiagnostic. The hardware troubleshooter will be launched as a result of this.
Follow the troubleshooter’s instructions as closely as possible.
Also see: How can I evaluate my Windows 10 PC?
When he’s not writing/editing/shooting/hosting all things tech, he streams himself racing virtual automobiles. Yadullah may be reached at [email protected], or you can follow him on Instagram or Twitter.
DP Watchdog Violation is a hard-to-detect bug. It’s known to be extremely difficult to find unless you are looking for it. If you are not, then your computer will keep crashing at random times. Here are 7 fixes to help you temporarily fix it.. Read more about dpc watchdog violation fix and let us know what you think.
Frequently Asked Questions
Can RAM cause DPC watchdog violation?
Yes, RAM can cause DPC watchdog violation.
What is Microsoft watchdog?
Microsoft watchdog is a service that monitors the health of your computer and alerts you when something goes wrong.
How do I fix watchdog Sys?
You can try to run the command killall watchdog in a terminal.
Related Tags
This article broadly covered the following related topics:
- dpc watchdog violation fix
- dpc watchdog violation windows 10
- dpc watchdog violation windows 8
- dpc watchdog violation reddit
- dpc watchdog violation